Keysight Technologies N2750A, User Manual

Page: 23 / 76

Using the Probes
1
N2750/1/2A User’s Guide 23
Inspecting the Probe
• Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the probe has been
checked mechanically and electrically.
• Check the accessories.
• If the contents are incomplete or damaged, notify your Keysight Technologies
Sales Office.
• Inspect the probe.
If there is mechanical damage or defect, or if the probe does not operate properly
or pass calibration tests, notify your Keysight Technologies Sales Office.
If the shipping container is damaged, or the cushioning materials show signs of
stress, notify the carrier as well as the sales office. Keep the shipping materials for
the carrier’s inspection. The sales office will arrange for repair or replacement at
Keysight Technologies’ option without waiting for claim settlement.
Cleaning the Probe
Disconnect the probe from the oscilloscope and clean the probe with a soft cloth
dampened with a mild soap and water solution. Make sure the probe is completely
dry before reconnecting it to an oscilloscope.