Keysight N108xA-Series IEEE 802.3 Ethernet KR/CR Compliance and Debug
Application
Getting Started
2
Installing N108xA and
FlexDCA on a PC
Follow the instructions in this chapter when you are installing both the N108xA IEEE 802.3 Ethernet
KR/CR application and the FlexDCA application on the PC. You must purchase and install a license
for the 86100DU-401 (for DCA-X oscilloscopes) or N109x-401 (for DCA-M oscilloscopes). Once the
license is installed, the 86100DU-401 or N109x-401 software will be enabled.
Figure 28
N108xA
and
N1010A FlexDCA Installed on PC (using 86100D oscilloscope)
NOTE
When you redeem an N108xA IEEE 802.3 Ethernet KR/CR license, you must select whether to
install the application on a specific 86100D Oscilloscope or a specific PC
.
