58
N108xA-Series Getting Started
4
Installing N108xA on the 86100D
Step 4. Install the Compliance Application
The following steps install the compliance application and its license as well as the license for the
86100DU-401. A version of the 86100DU-401 is automatically installed for use with the compliance
application.
1
Go to www.keysight.com and search for and download the compliance application. Install the
application on the specific 86100D for which you redeemed the license.
2
Place the license file that you received from Keysight in a folder or accessible memory device.
3
If not already done, purchase an 86100DU-401 license. Place the license file that you received from
Keysight in a folder or accessible memory device.
4
On the Windows start menu, locate the Keysight License Manager and start it.
Figure 56
License Manager in Windows Start Menu
5
In the Keysight License Manager, select and right click the compliance application listing and click
Install
. If the compliance application is not listed, click
File
>
Install
.
6
In the
Install License File(s)
dialog box, locate your license file and click
Open
. You may have up four
licenses: N1081A, N1082A, N1083A, and N1084A as shown in
NOTE
When you redeemed a compliance application license, you selected to install the application either on a specific
86100D or a specific PC.
NOTE
If you are using one of the switching test sets (switch matrix), you will also need one of the N1081A-7FP,
N1082A-7FP, N1083A-7FP, or N1084A-7FP licenses.
