Keysight M9451A PXIe Measurement Accelerator
22
1.
2.
3.
4.
5.
Step 5 - Verify Operation of M9451A Module
If you are unable to communicate with Keysight M9451A PXIe Measurement
Accelerator, verify that the following installations are correct:
Keysight IO Libraries Suite
Keysight M9451A PXIe Measurement Accelerator SFP program
Keysight Connection Expert
Module and chassis drivers
System Interface Card and PC PXIe card connections, if you are using an
external host PC
If all the modules and their slot locations are not visible in the Connect to
Instrument dialog of SFP program:
Close the SFP.
Start Keysight Connection Expert by selecting Start > All Programs >
Keysight Connection Expert.
On the Instruments tab, click the Rescan button.
On the PXI/AXIe Chassis tab, verify the module appears in the chassis slot
list.
Restart the SFP.
The Measurement Accelerator IVI driver software must be installed before the
M9451A PXIe Measurement Accelerator appears in the Chassis Content view. If the
driver is missing, the module may appear in the Instruments view, but with an
unknown slot number.
