20
M9403A and M9404A
General Safety and Information
General Safety and Information
Introduction
Review this product and related documentation to familiarize yourself with safety markings and
instructions before you operate the instrument.
This product has been designed and tested in accordance with accepted industry standards, and
has been supplied in a safe condition. The documentation contains information and warnings that
must be followed by the user to ensure safe operation and to maintain the product in a safe
condition.
Safety Earth Ground
WARNING
This is a Safety Class I Product (provided with a protective earthing ground
incorporated in the power cord). The mains plug shall only be inserted in a socket
outlet provided with a protective earth contact. Any interruption of the protective
conductor inside or outside of the product is likely to make the product dangerous.
Intentional interruption is prohibited.
CAUTION
Always use the three prong AC power cord supplied with this product. Failure to
ensure adequate earth grounding by not using this cord may cause product damage
and the risk of electrical shock.
Statement of Compliance
This product has been designed and tested in accordance with accepted industry standards, and
has been supplied in a safe condition. The documentation contains information and warnings that
must be followed by the user to ensure safe operation and to maintain the product in a safe
condition.
Cleaning Precautions
Remove the power cord to the instrument. To clean the connectors use alcohol in a well ventilated
area. Allow all residual alcohol moisture to evaporate, and fumes to dissipate prior to energizing
the instrument.
WARNING
To prevent electrical shock, remove the
M9403A or M9404A
from the chassis before
cleaning. Use a dry cloth or one slightly dampened with water to clean the external
case parts. Do not attempt to clean internally. To clean the connectors, use alcohol
in a well-ventilated area. Allow all residual alcohol moisture to evaporate, and the
fumes to dissipate prior to energizing the instrument.
WARNING
If flammable cleaning materials are used, the material shall not be stored, or left
open in the area of the equipment. Adequate ventilation shall be assured to prevent
the combustion of fumes, or vapors.
Summary of Contents for M9403A
Page 4: ...1 M9403A and M9404A ...
