Keysight M9391A PXIe Signal Analyzer & M9381A PXIe Vector Signal Generator 1 MHz to 3 GHz or 6 GHz
42
Part Number
Connection
Cable Description
M9350A 100 MHz Out to M9214A 100
MHz In
Cable, coaxial, SMB (female) - SMB (female)
120 mm
8120-5091
M9350A IF Out to M9214A IF In
Cable, coaxial, SMB (female) - SMB (female)
120 mm
W1312-20237 or
W1312-20271
M9301A RF/LO Out 1A to M9350A LO In
Cable, semi-rigid, SMA (male) - SMA (male)
1250-23161
M9350A RF In connector saver
Adaptor, coaxial straight SMA (male) - SMA
(female)
8121-20631
This cable can be used to direct an
External Reference into the M9300A Ref In
connector.
Cable, coaxial, BNC (male) - SMB (female)
1200 mm
Multiple M9391A PXIe VSAs in a Chassis
Up to four M9391A PXIe VSAs can be installed in a single M9018/M9019A 18-slot
PXIe Chassis, sharing a single embedded controller as shown here. These PXIe
VSAs share one M9300A PXIe Frequency Reference and can be time-synchronized
with backplane triggering to measure multi-channel transmitters and analyze
MIMO devices. The PXIe VSAs can also be configured to be phase coherent with
Option 012 and cabling all channels to use a single M9301A PXIe Synthesizer
module with Y1243A cable kit. Slot blockers and EMC filler panels are installed in
the empty slots.
The recommended multiple PXIe VSA system is configured as follows:
