14
Keysight M9038A PXIe Embedded Controller Startup Guide
Step 2: Verify Shipment Contents
Step 2: Verify Shipment Contents
Your shipment should have included the following:
-
The Keysight M9038A Embedded Controller module that you ordered.
-
This printed manual (
M9038A PXIe Embedded Controller Startup Guide
).
-
One Thunderbolt 3 USB Type-C Cable with Bracket Assembly.
The Microsoft Windows operating system and the latest version of Keysight IO
Libraries Suite, and all necessary driver software were installed for you at the
factory.
No other drivers are required to operate the controller module. However, your
application modules may require drivers. If possible, you should connect the
M9038A to the Internet and download drivers from the original source.
Alternately, you can transfer the drivers on a USB memory stick and install them
accordingly.
The most current version of Keysight IO Libraries is required prior to
installing and running any other software. The latest version can be
downloaded from:
A GPIB cable is NOT supplied with the controller. Note that the
GPIB cable is a standard micro type 2 GPIB cable with standard pin
wiring and is not compatible with the M9036A Embedded
Controller GPIB cable. It is available from Keysight as an accessory
cable, part number Y1260A.
