Keysight M9038A PXIe Embedded Controller Startup Guide
11
M9038A at a Glance
Front Panel LED Indicators
The following table lists the LEDs on the front panel and a brief description of
their use and what they indicate.
Gigabit Ethernet (GbE) LEDs
Both LEDs off indicate that network link is not established or system is powered
off.
LAN Rst Button
The LAN Rst button is reserved for Keysight use only. Depressing the LAN Rst
button has no effect.
LED Indicator
Color
Description
Pwr
Green
If the LED is on, the power supply to the controller is good
and the system should boot.
SSD
Amber
When the Solid State Drive (SSD) is active, the LED will
flash.
LAN
N/A
These two LEDs are reserved for Keysight use only. The
LEDs should never turn on or flash.
Usr
N/A
Speed and Link
10Mbps: off
100Mbps:
Green
1Gbps:
Amber
Active:
Amber
Blinks when accessing IO
RJ-45
connector
Port #1
Speed and Link
100Mbps:
off
1Gbps:
Green
10Gbps
: Amber
Active:
Amber
Blinks when accessing IO
RJ-45
connector
Port #2
