64
Keysight M8132A 640 GSa/s Digital Signal Processor User’s Guide
6
Remote Programming
The syntax of the response is defined as: The <nonzero digit> and
sequence of <digit> follow the rules in IEEE 488.2, Section 8.7.9. A <SCPI
header> is defined as: It contains all the nodes from the root. The <SCPI
program mnemonic> contains the node in standard SCPI format. The short
form uses uppercase characters while the additional characters for the
long form are in lowercase characters. Default nodes are surrounded by
square brackets ([]).
Example
Query
:SYST:HELP:HEAD?
:SYSTem:LICense:EXTended:LIST?
Query
:SYSTem:LICense:EXTended:LIST?
Description
The query lists the licenses installed.
Example
Query
:SYST:LIC:EXT:LIST?
:SYSTem:SET[?]
Command
:SYSTem:SET[?] <binary block data>
Description
In query form, the command reads a block of data containing the
instrument’s complete set-up. The set-up information includes all
parameter and mode settings, but does not include the contents of the
instrument setting memories or the status group registers. The data is in a
binary format, not ASCII, and cannot be edited.
In set form, the block data must be a complete instrument set-up read
using the query form of the command.
This command has the same functionality as the
*LRN
command.
Parameters
<binary block data>
Example
Command
:SYST:SET <binary block data>
Query
:SYST:SET?
