Keysight Technologies Ixia XGS12, Assembly Manual, Page: 18 / 38

4. Tighten the thumbscrew at the upper left corner of the power supply module.
5. Replace the rear cover and fasten it with the screws.
Remove and Insert Fan Module
The fan module is located on the rear side of the chassis. For details see the XGS12 Chassis Back View
image .
To remove the fan module:
1. Unfasten the four screws that are present on the edges of the fan module.
2. Pull the module outwards.
Chapter 3 Install XGS12 Chassis
– 11 –