Keysight Technologies Ixia XGS12, Assembly Manual, Page: 16 / 38

1. Unfasten the screws.
2. Pinch the clips and then pull outwards.
Removing processor module
To insert the processor module:
1. Slide the module into the slot.
2. Pinch on the clips and push them in.
3. Fasten the screws.
Inserting processor module
Remove and Insert Power Supply Module
The power supply module is accessible after removing the rear cover. For details see the
XGS12
Chassis Back View image
.
To remove the rear cover, unfasten the four screws around the cover and pull out the cover.
Chapter 3 Install XGS12 Chassis
– 9 –