A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that,
if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do
not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met.
Direct current
Alternating current
Frame or chassis terminal
Standby supply. Unit is not completely disconnected from AC mains when switch is off.
Risk of electric shock
Risk of danger (refer to this manual for specific Warning or Caution
information)
Protective earth (ground) terminal
Safety Notices
The following general safety precautions must be observed during all phases of operation of this
instrument. Failure to comply with these precautions or with specific warnings or instructions
elsewhere in this manual violates safety standards of design, manufacture, and intended use of the
instrument. Keysight Technologies assumes no liability of the customer’s failure to comply with the
requirements.
General
Do not use this product in any manner not specified by the manufacturer. The protective
features of this product may be impaired if it is used in a manner not specified in the
operating instructions.
Environmental Conditions
Never use the instrument outside of the specified environmental conditions described
under Environmental Conditions.
Ground the Instrument
This product is provided with protective earth terminals. To minimize shock hazard, the
instrument must be connected to the AC mains through a grounded power cable, with
the ground wire firmly connected to an electrical ground (safety ground) at the power
outlet. Any interruption of the protective (grounding) conductor or disconnection of the
protective earth terminal will cause a potential shock hazard that could result in injury
or death.
Keysight IOT8700 Series IoT Wireless Test Solution User's Guide
5
Legal and Safety Information
