Keysight Technologies InfiniiVision M9241A, Scpi Programmer'S Manual

Page: 912 / 1516

912 Keysight InfiniiVision M9241/42/43A PXIe Oscilloscopes SCPI Programmer's Guide
27
:SBUS<n> Commands
:SBUS<n>:UART Commands
NOTE
These commands are only valid when the UART/RS-232 triggering and serial decode option
has been licensed.
Table 112 :SBUS<n>:UART Commands Summary
Command Query Options and Query Returns
:SBUS<n>:UART:BASE
<base> (see
page 914
)
:SBUS<n>:UART:BASE?
(see
page 914
)
<base> ::= {ASCii | BINary | HEX}
:SBUS<n>:UART:BAUDrat
e <baudrate> (see
page 915
)
:SBUS<n>:UART:BAUDrat
e? (see
page 915
)
<baudrate> ::= integer from 100
to 8000000, 10000000, or 12000000
:SBUS<n>:UART:BITorde
r <bitorder> (see
page 916
)
:SBUS<n>:UART:BITorde
r? (see
page 916
)
<bitorder> ::= {LSBFirst |
MSBFirst}
n/a :SBUS<n>:UART:COUNt:E
RRor? (see
page 917
)
<frame_count> ::= integer in NR1
format
:SBUS<n>:UART:COUNt:R
ESet (see
page 918
)
n/a n/a
n/a :SBUS<n>:UART:COUNt:R
XFRames? (see
page 919
)
<frame_count> ::= integer in NR1
format
n/a :SBUS<n>:UART:COUNt:T
XFRames? (see
page 920
)
<frame_count> ::= integer in NR1
format
:SBUS<n>:UART:FRAMing
<value> (see
page 921
)
:SBUS<n>:UART:FRAMing
? (see
page 921
)
<value> ::= {OFF | <decimal> |
<nondecimal>}
<decimal> ::= 8-bit integer from
0-255 (0x00-0xff)
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
:SBUS<n>:UART:PARity
<parity> (see
page 922
)
:SBUS<n>:UART:PARity?
(see
page 922
)
<parity> ::= {EVEN | ODD | NONE}
:SBUS<n>:UART:POLarit
y <polarity> (see
page 923
)
:SBUS<n>:UART:POLarit
y? (see
page 923
)
<polarity> ::= {HIGH | LOW}