Keysight Technologies InfiniiVision 3000T X Series, Programmer'S Manual

Page: 713 / 1420

:SBUS<n> Commands
29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 713
:SBUS<n>:A429:TRIGger:LABel
(see page 1276 )
Command Syntax
:SBUS<n>:A429:TRIGger:LABel <value>
<value> ::= 8-bit integer in decimal, <hex>, <octal>, or <string>
from 0-255 or "0xXX" (don't care)
<hex> ::= #Hnn where n ::= {0,..,9 | A,..,F}
<octal> ::= #Qnnn where n ::= {0,..,7}
<string> ::= "0xnn" where n::= {0,..,9 | A,..,F}
The :SBUS<n>:A429:TRIGger:LABel command defines the ARINC 429 label value
when labels are used in the selected trigger type.
To set the label value to don't cares (0xXX), set the value to -1.
Query Syntax
:SBUS<n>:A429:TRIGger:LABel?
The :SBUS<n>:A429:TRIGger:LABel? query returns the current label value in
decimal format.
Return Format
<value><NL> in decimal format
Errors • "-241, Hardware missing" on page 1235
See Also • "Introduction to :TRIGger Commands" on page 1007
• ":SBUS<n>:A429:TRIGger:TYPE" on page 718