Keysight Technologies Infiniium MXR Series, User Manual

Page: 4 / 116

4 Keysight Infiniium MXR-Series Real-Time Oscilloscopes User's Guide
• 16 digital input channels (1-bit vertical resolution) enabled with the MSO
license.
A mixed-signal oscilloscope (MSO) lets you debug your mixed-signal designs
using analog signals and tightly correlated digital signals simultaneously. The
16 digital channels have a 8 GSa/s sample rate, with a 400 MHz toggle rate.
Thresholds levels can be set per nibble.
• Many trigger modes including: edge, glitch, pulse width, pattern/state, runt,
setup and hold, edge transition, edge then edge, timeout, window, OR'd edges,
Nth edge, and burst. Also available are sequential triggering and InfiniiScan
(Zone triggering and finders for measurements, serial bit streams, runts, and
non-monotonic edges).
• Protocol triggering and decode options for many types of protocols including:
ARINC-429, BroadR-Reach/100BaseT1, CAN, CAN-FD, eSPI, eUSB2, Ethernet
10BT, Ethernet 100BT, I2C, I2S (LJ, RJ, TDM), LIN, Manchester, MIL-STD 1553,
MIPI-I3C, Quad-SPI, RS-232/UART, SENT, Spacewire, SPI, SPMI, SVID, USB
2.0, USB-PD, and more.
• Protocol decode and search options for even more protocols.
• Built-in counter and digital voltmeter (DVM) hardware for the analog input
channels.
• Built-in, license-enabled waveform generator with: sine, square, ramp, pulse,
DC, noise, sine cardinal, exponential rise, exponential fall, cardiac, Gaussian
pulse, PRBS, and demo waveforms output to the GEN OUT side-panel BNC
connector. Generated signals can be used to provide stimulus to a device under
test (DUT) or for demos.
• Front-panel knobs and keys for: default and autoscale setups, acquisition run
control (run, stop, and single), horizontal settings (time/division, trigger
position, zoom window, and time navigation), vertical settings (scaling down to
1 mV/div in hardware and offset), multiple markers (to check voltage or
Δ
-time
at any point on a waveform), trigger level, digital channels, protocol decode,
clearing acquisitions from the display, and more.
Knobs are pushable for making quick selections.
• 15.6 inch color 1920x1080 (FHD) capacitive touch screen display with
multi-touch (gestures), handles, and resizing allows oscilloscope operation
without an external pointing device.
• High-capacity removable solid state hard drive for fast boot-up, storing setups,
and saving measurement results.
• USB 3.0 and LAN ports make printing, saving, and sharing data easy.
• VGA and DisplayPort ports on the motherboard I/O panel for displaying the
screen on a different monitor.
• 64-bit Windows operating system and graphical user interface with familiar
menus, toolbars, etc. Ability to install other Windows applications like vector
signal analysis (VSA) software.
• Eight analog channel waveform memories and one digital channels waveform
memory for comparing with other channels or math waveforms.