Keysight Technologies Infiniium MSOV 084A, Service Manual

Page: 128 / 164

128 Infiniium V-Series Oscilloscopes Service Guide
5
Replacing Assemblies
Removing and replacing the power supply
1
Disconnect the power cable and remove the top panel as described previously.
2
Disconnect the AC power cable from the bulk 12 V power supply.
)
3
Follow the remaining instructions on the power supply to remove it.
)
WARNING
SHOCK HAZARD! If the power supply is defective it could have a dangerous charge
on some capacitors. This charge could remain for many days after removing power
from the supply.
Figure 74
Figure 75
NOTE
There are no user-replaceable fuses in the oscilloscope.