Keysight Technologies FieldFox A Series, User Manual

Page: 664 / 756

664 Keysight N9927-90001 User’s Guide
System Settings
Service Diagnostics
— Firmware Release – The currently installed version of software. Check to
see if you have the latest firmware at:
www.keysight.com/find/fieldfoxsupport
— Network Identity – The network name and current IP address of your
FieldFox.
— Reflectometer Factory Cal - The Factory (CalReady) Calibration shows the
date and time that the factory cal was performed for each test port and the
Thru connection. The format is P1 <date time>, P2 <date time>, P1-P2
<date time>. The factory calibration is updated when you send your
FieldFox to Keysight for Instrument Calibration. Learn more in “Instrument
Calibration” on page 719 .
Event Log
The Event Log shows the information that has appeared on the FieldFox
screen. The most recent information is at the top of the table.
Press
Clear Events to erase this information.
Battery
Learn more in
Chapter 32, “Working with the Lithium-Ion Battery”, on page
687
.
Internal Temperatures
Learn about the importance of the internal FieldFox temperatures in
“FieldFox High
Temperature Protection” on page 30
.
Erase User Data
All data that you have written to the FieldFox can be erased with the press of a
button. You would do this if your FieldFox is located in a secure environment
and must be routinely erased of sensitive data.
All data is removed from the FieldFox internal “
UserData
” partition. This
includes all State files and Trace + State files (*.sta), all Data files (*.csv, *.snp),
all Picture files (*.png), all Cal Kit files, and all Cable files.
External media that is inserted (mini-SD card or USB flash drive) is NOT
erased.
The “
Lost Clusters
“ folder and files are NOT erased because they are part of
the file system housekeeping.
How to Erase User Data
— Press System 7 .
— Then Service Diagnostics .
— Then Advanced