Keysight Technologies FieldFox A Series, User Manual

Page: 436 / 756

436 Keysight N9927-90001 User’s Guide
Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
— Then Record Playback Setup The following selections are available ONLY
when a session is NOT open.
— Then Storage Device to select the media which stores the sessions to be
managed. This is a different setting from the Save/Recall Storage Device
setting.
— Then choose from the following:
— Internal FieldFox memory (default)
— SD Card An external SD Card (must be inserted)
— USB An external USB flash drive (must be inserted)
— Then Manage Sessions
— Then choose from the following:
—
Rename Using the FieldFox labeler, change the name of the session.
AutoSession (n) is the default name where (n) is the next-available number.
Learn more in “How to use the FieldFox labeler ” on page 674 .
— Sort Arrange the listing of sessions by Name , by Date , or by Size .
— Delete After a confirmation prompt, removes the contents of the
selected session from the list.
— Copy Copies the selected session to a different storage device, or the
same storage device with ‘Copy(n)_’ appended to the beginning of
the name so that duplication is prevented.
— Copy All Copies ALL of the listed sessions to a different storage
device, or the same storage device with ‘Copy(n)_’ appended to the
beginning of the names so that duplication is prevented.
— Delete All Deletes ALL of the listed sessions.
Record Playback Example (SA Only)
The following “Interval Recording” example shows how you can record spectral
activity over a longer period of time with less trace storage.
— Press Trace 6 then, with Trace = 1, press State then Max Hold
— Then Record Playback
— Then New Session
— Then Recording Configuration
— Then Record Source to Trace1
— Then Record Interval to 10 s (seconds).
— Then Back
— Then Recorder Player