Keysight Technologies FieldFox A Series, User Manual

Page: 431 / 756

Keysight N9927-90001 User’s Guide 431
Interference Analyzer (SA Mode) – Option 236
Record/Playback (SA Option)
— Press Play to start replaying the recording from the beginning.
— Press Record to continue recording.
How to Playback a Session
— Press Trace 6
— If the session is already open, skip the following step. Otherwise:
— Then
Record Playback Setup
— Press Recall Session Then select a session to playback and press
Open .
— Then Recorder Player
— Then Play
PLAY is displayed in the left of screen graticules during playback. When the
end of the recording is reached, playback begins again at trace 1 and
continues to loop indefinitely.
During playback, choose from the following:
— Pause Resume Temporarily halts playback. Then choose from the
following:
— Pause Resume Press to continue playing.
— Playback State/Tag Allows you to continue playback from a state
tag, or scroll through the state tags. Enter a value between 1 and the
total number of state tags using the numeric keypad,
arrows, or
the rotary knob. Active when playback is paused. Learn more in
About State and User Tags in “About State and User Tags” on
page 429 .
— Playback Trace Activated automatically when Paused. Allows you to
continue playback from a specific trace, or scroll through traces
manually. Enter a value between 1 and the total number of traces
using the numeric keypad,
arrows, or the rotary knob.
— Stop Immediately stops playback. Then choose from the following:
— Play Start playback from trace 1.
— Record Resume recording from the last recorded trace.
— Record Playback Setup Return to the setup menu to change
Configuration settings or Close the session.
Recording Configuration
To change Recording Configuration settings: