Two-Oscilloscope System, UXR-Series
2
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
13
Connecting the Equipment
Parts in the N2164A (Two in Rack) Expansion Kit
In the MBASE expansion kit, these parts are used to connect the oscilloscopes in
the MultiScope system:
These parts are used to create a long cable for performing channel deskew:
Part number
Qty
Description
54964-61632
5
1 m phase-stable cable
54964-60401
1
6-way splitter assembly with rack mount shelf
1250-3745
4
50
Ω
SMA terminator
Part number
Qty
Description
54964-61632
2
1 m phase-stable cable
1250-2818
2
Right-angle male to female SMA adapter
1250-3758
1
Female/female SMA adapter (connector saver) 3.5 mm (f)
1250-3347
1
Push-on male SMA to female SMA adapter
Summary of Contents for EXR Series
Page 1: ...Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide...
Page 32: ...32 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide 5 Next Steps...
Page 34: ...34 Keysight UXR Series and MXR EXR Series MultiScope Hardware Configuration Guide Index...
