Keysight Technologies E8740A Installation & User Manual Download Page 62

Page: 62 / 151

Software Installation, Configuration & Licensing

Keysight E8740A Automotive Radar Installation & User Guide

Licensing

The Automation platform for automotive radar has a total of three different
licenses.

The license status of the TAP Plugins can be seen using the TAP Plugin manager:

Figure 3-1

License status in TAP Plugin Manager

Software Number

Description

KS83200A

Automation platform for Automotive Radar – enables basic features, test

sequence with a loop/sweep and HW configuration for E8740A 010-090.

KS83RX0A

Automation platform for Automotive Radar - enables Rx and Interference test.

Optional and applicable to E8740A 070 and 080.

KS83ST0A

Automation platform for Automotive Radar - enables tests according to ETSI

standard. Optional and apllicable for E8740A 010, 040, 050, 060, 070, 080 and

090.

Summary of Contents for E8740A
























































































































































Search results

Summary of Contents for E8740A

Reviews:

Brands by name

Popular brands

Keysight Technologies E8740A, Installation & User Manual

Search results

Summary of Contents for E8740A

Reviews:

Brands by name

Popular brands