8 Keysight E8363B/C and E8364B/C Installation Note
General Information
Installation Procedure for the Upgrade Kit
1-
Figure 2
Outer Cover Removal
Step 2.Remove the Front Panel Assembly (Option 014 Only)
Refer to
for this procedure.
1.
With a 5/16-inch wrench, remove the six front panel semirigid jumper
cables (item
①
).
2.
With a T-10 TORX driver, remove the eight screws (item
✍
) from the sides
of the frame.
3.
Slide the front panel over the test port connectors.
The figure above shows the E8363/4B front panel and floppy disk drive.
The E8363/4C front panel has a slightly different appearance and does not
include a floppy disk drive.
Before removing the front panel from the analyzer, lift and support the
front of the analyzer chassis.