manualshive.com logo in svg

Keysight Technologies E7760A, Getting Started Manual

Share
Download
Keysight Technologies E7760A Getting Started Manual Download Page 17

Getting Started Guide                                                                                                                                          17

Quick Start
Location and Mounting

Shipping Problems?

If the shipping materials are damaged or the contents of the container are 

incomplete:

— Contact the nearest Keysight Technologies office.
— Keep the shipping materials for the carrier’s inspection.
— If you must return a test set to Keysight Technologies, use the undamaged 

original or comparable shipping materials. See 

“Returning Your Test Set for 

Service” on page 25

.

Location and Mounting

It is recommended to suspend the transceiver above the Device Under Test 

(DUT), with the mmWave port pointed downwards at the DUT, so that heat 

given off by the external cooling fins of the transceiver will rise away from the 

DUT. Leave a minimum clearance of 2.5 inches (7 cm) around the transceiver. 

Also, ensure there is enough room to attach the RF Cable Assembly, which 

connects to the M1650A mmWave Transceiver to the E7760A Wideband 
Transceiver.

Summary of Contents for E7760A




























Reviews:

No comments

Brands by name

Popular brands

Load more brands