Getting Started Guide 91
Test Set Operating System
Updating the Keysight E7515A NB-IoT Application
Updating the Keysight E7515A NB-IoT Application
The following steps are required to update your Keysight E7515A UXM
software with the Keysight E7515A NB-IoT Application. This software is
licensed.
Look for latest software versions at:
http://www.keysight.com/find/softwaremanager
Removing the Keysight E7515A NB-IoT Application
This section only applies to software versions 1.8.x.x and earlier. Skip this section
for software versions 1.9.x.x and later.
Step
Notes
1.
Connect a USB keyboard and mouse to
the instrument
2.
Log out of the default user (instrument):
Select
Start
,
Log Off
3.
At the log in prompt enter:
User Name:
administrator
Password:
Keysight4u!
4.
Uninstall the Keysight E7515A NB_IoT
Application by performing the following:
Select
Start
,
Control Panel
,
All
Control Panel Items
,
Programs and
Features
.
Find the
Keysight E7515A NB_IoT
Application
. Right-click on the
application and select
Uninstall
.
5.
Close the UXM Control Panel.
Use the “Exit” option in UXM Control Panel pop-up menu located
in Notification Taskbar.
6.
When prompted to completely remove
the selected application and all of its
features, select
Yes
.
When the software uninstall is complete,
select
Finish
.
The UXM Control Panel should be closed at the beginning of the
uninstallation. You must launch it manually at the end of this
process.
