Getting Started Guide 51
Control Panel Functions
BIST (Built-In Self Tests)
BIST (Built-In Self Tests)
These tests provide you with the ability to diagnose which areas of the UXM
hardware and firmware are not functioning properly and are primarily useful
when speaking with a Keysight technical support representative.
When to Perform a Test
Perform the BIST whenever you are experiencing a possible UXM malfunction.
Base this decision when any of the following occurs:
— After rebooting the hardware boards (by selecting
, the Reboot
icon), the E7515A Control Panel pictorial graphic displays a red screen.
— It appears that either the UL or DL is not communicating properly.