Installation Note E6650-90013
25
Run Self-Test Manual Verify
Run Self-Test Manual Verify
1.
After enabling the TRX module and running the FPGA update, restart the E6650A and verify
that all M9440A TRX modules are detected in the Show System screen.
2.
Check the new TRX modules functionality. Press the
System
,
More 1 of 2
, and
Diagnostic
button. Run the TRX module self-test by pressing the
All
button. The bottom of the screen
will show the status of the test and when it has completed. You can view the test results in the
Show self-test results screen.
