46
Chapter 3
Setting Up Measurement Conditions and Display
Setting Up Measurement Conditions
Setting up trigger delay time
To set the trigger delay time, use the following command.
•
:TRIGger:SEQ2:DELay on page 300
Setting up source delay time
To set the source delay time, use the following command.
•
:TRIGger[:SEQ1]:DELay on page 297
Setting trigger sync source
To set the trigger sync source, use the following command.
•
:SOURce:VOLTage:MODE on page 265
Setting Signal Level Compensation (SLC)
To set the signal level compensation (SLC), use the following command.
•
:SOURce:VOLTage:ALC[:STATe] on page 263
Sample Program
to view an example of setting up measurement conditions and LCD
display.
