
Chapter 10
267
Command Reference
E4981A SCPI Commands
10
. Comm
and
Refe
ren
ce
:STATus:OPERation:UPDate
Syntax
:STATus:OPERation:UPDate {ON|OFF|1|0}
:STATus:OPERation:UPDate?
Description
Enables/Disables update of the Operation Status Event register. The disabling of status
register can shorten the EOM time.
Parameters
Query response
{1|0}<newline><^END>
Related commands
:STATus:OPERation:ENABle on page 266
Equivalent key
sequence
No equivalent key is available on the front panel.
:STATus:PRESet
Syntax
:STATus:PRESet
Description
Initializes the Operation Status register and the Questionable Status register. (No query)
Equivalent key
sequence
No equivalent key is available on the front panel.
:STATus:QUEStionable:CONDition?
Syntax
:STATus:QUEStionable:CONDition?
Description
Reads out the value of the Questionable Status Condition register. However, the E4981A
does not support the Questionable Status register. Therefore, executing this command has
no effect.(Query only)
Query response
{numeric}<newline><^END>
The E4981A does not support the Questionable Status register. Therefore, the query
response is always 0.
Equivalent key
sequence
No equivalent key is available on the front panel.
Description
ON or 1
Enables the update of the Operation Status Event register.
OFF or 0 (initial value)
Disables the update of the Operation Status Event register.