Keysight Technologies B1507A, User Manual

Page: 105 / 190

Keysight B1507A User’s Guide, Edition 1 3- 27
How To Perform Measurement
Displaying and Operating Graph
By the radio buttons at the top of graph area, you can select the line type of curve
from the Line, Dot, or Line&Dot.
Step 3. Change the minimum and maximum values of X and Y-axises
If the auto scale mode button is selected, the X and Y-axises of the graph are
automatically changing to fit the measured data during measurement execution.
If the fixed scale mode button is selected and the auto-scale button is
clicked, the X and Y-axises of the graph are changed to fit the measured data.
Or, you can change the minimum and maximum values of X and Y-axises by
clicking the value.
How To Use the Marker
You can use the domain marker and/or trace marker to read the value on the curve.
The following table shows the measurement softwares and their furnished marker
function.
Marker Description Applied Software
Domain Marker
Vertical line marker.

The marker moves in the direction of
X and you can read the X-axis value
of the marker and Y-axis values of
the intersections of marker and
characteristics curves.
I/V measurement,

Capacitance measurement,

Gate charge measurement
Trace Marker
Circle marker.

The marker moves on a
characteristics curve and you can
read the X and Y-axis values of the
marker.
I/V measurement,

Capacitance measurement,
