![Keysight Technologies AC6800 Series Operating And Service Manual Download Page 64](http://html1.mh-extra.com/html/keysight-technologies/ac6800-series/ac6800-series_operating-and-service-manual_1961704064.webp)
Welcome
This manual includes user, service, and programming information for the Keysight AC6800 Series of compact AC
sources, which can be readily used on the bench or in a test rack. The simple user interface allows you to easily
access and view setup and measurement information directly from the front panel or programmatically.
Choose from models up to 4000 VA, all with 0 to 270 Vrms and 40 to 500 Hz output capability. Both LAN/LXI Core
and USB interfaces are standard. You can optionally choose to add GPIB or an analog interface board to add basic
transient signals.
Instrument Driver
In addition to using SCPI commands, you can also control the instrument using the IVI driver, available at
. The newest version can also be downloaded at
www.keysight.com/find/AC6800firmware
Models and Options
The AC6800 Series includes four models and four options, as shown below.
Model
Maximum Power (VA)
AC6801A
500
AC6802A
1,000
AC6803A
2,000
AC6804A
4,000
The AC6800 Series has four options, described below.
Option
Description
AC68RAC3 Rack mounting kit for AC6801A, AC6802A, and AC6803A
AC68RAC6 Rack mounting kit for AC6804A
AC68GPBU GPIB interface board
AC68ALGU Analog interface board - controls the output with external analog signals in two modes:
EXT-AC: The AC output voltage varies according to the input DC signal.
EXT-DC: The input waveform is amplified and output.
Contacting Keysight
United States: (800) 829-4444
Europe: 31 20 547 2111
Japan: 0120-421-345
Use
to contact Keysight worldwide.
62
Keysight AC6800 Series Operating and Service Guide