Keysight Technologies 85059B, Operating And Service Manual

Page: 7 / 68

1
Keysight 1.0 mm Precision Calibration Kit
85059B
Operation and Service Guide
1 General Information
Chapter One at-a-Glance
About this Manual
This manual describes the 85059B calibration kit and provides replacement
part numbers, specifications, and procedures for using, maintaining and
troubleshooting this kit.
Chapter One at-a-Glance
Section Title Summary of Content
“Calibration Kit Overview” on page 1-3 Describes the 85059B calibration kit contents, how to identify shorts,
and compatible network analyzers.
“Offset-Short Calibration Using the
85059B (Precision) Calibration Kit and the
PNA’s Guided Power Calibration” on
page 1-7
Provides links for performing a Guided Power Calibration and using
the 85059B calibration kit.
“Calibration Residual Error Specifications”
on page 1-8
Describes the data-based residual error specifications. Refer to
Table 1-1 on page 1-8 .
“Serial Numbers” on page 1-9 How to verify your calibration kit’s serial number in a table to avoid
possible confusion with other calibration kits.
“Incoming Inspection” on page 1-10 Verifying your calibration kit’s contents and what to do, if there is an
problem.
“Clarifying Connector Gender” on
page 1-12
A discussion of how to identify the male and female connectors.
“Clarifying the Terminology of a
Connector Interface” on page 1-13
A discussion of some of the connector terminology.
“Preventive Maintenance” on
page 1-13
How to avoid damaging the devices in your calibration kit.
“When to Calibrate” on page 1-14
How often should you re-calibrate your network analyzer.