Keysight Technologies 16190B, Operation And Service Manual

Page: 7 / 21

Keysight 16190B Performance Test Kit 7
General Information
Repacking for Shipment
Repacking for Shipment
This section provides information on how to repackage the performance test kit
for shipment.
Keysight Technologies Packing Materials
Containers and materials identical to those used in factory packaging are
available from Keysight Technologies. If the instrument is being returned to
Keysight Technologies for servicing, attach a tag indicating the type of service
required, return address, model number, and full serial number. Also, mark the
container FRAGILE to ensure careful handling. In any correspondence, refer to
the unit by model number and full serial number.
Non-Keysight Packing Materials
The following general instructions should be used for re-packing with
commercially available packing materials:
1. If shipping to a Keysight Technologies office or service center, attach a tag
indicating the type of service required, return address, model number, and
full serial number.
2. Use a strong shipping container. A double-walled carton made of 350
pound test material is adequate.
3. Set enough shock absorbing material (3- to 4-inch layer) around all sides of
the case to provide a firm cushion and to prevent movement inside the
container.
4. Seal the shipping container securely.
5. Mark the shipping container FRAGILE to ensure careful handling.
6. In any correspondence, refer to the unit by model number and full serial
number.