TA7004NT TimeAttendance Terminal User Manual V1.00
11
Series connection：Terminals are connecting via series connection.
A multi-bus RS485HUB is needed if customer needs parallel
connection.
RS485 Single Point Ground：If controller transmission line is with
shielding or needs ground line, then all controllers
’
transmission line can be grounded in either controller. Please
note do not gather all metal side to the GND of controller.
Terminal Resistance：Series connected at the end of the circuit.
2.5
TCP/IP
TA7004NT network connecting
Fig 2-7
RJ45
definition
1
TX+
2
TX-
3
RX+
6
RX-
Normal net cable
（
to switch
）
