16
XB2 Kit
Rotary Setup
Rotary Motor:
RUN/STOP switch of the rotary simulation.
Rotary Fast:
SLOW/FAST switch of the rotary simulation.
Bypass:
Switching off the rotary simulation.
The Rotary Setup menu items have a common submenu:
HornSlowSpeed:
Rotation speed of the horn in SLOW position.
RotrSlowSpeed:
Rotation speed of the rotor in SLOW position.
HornFastSpeed:
Rotation speed of the horn in FAST position.
RotrFastSpeed:
Rotation speed of the rotor in FAST position.
HornRampUp:
Horn ramp up time.
RotorRampUp:
Rotor ramp up time.
HornRampDown:
Horn runout time
RotorRampDown:
Rotor runout time.
Rotary Throb:
Microphone placement.
Rotary Spread:
Stereo width.
Rotary Balnce:
Level balance between rotor and horn.
Percussion Setup
Percussion:
Percussion selection stepwise in all possible combinations of NORM/SOFT,
FAST/SLOW, 2nd/3rd (not for H100) and OFF. This menu is not active when
EnvelopeGen
mode
is set. Then only (EG ADSR) appears to indicate that a percussion effect can be achieved here by
shaping the ADSR envelope.
PercNormLvl:
Level in position NORMAL.
PerSoftLvl:
Level in position SOFT.
PercLongTm:
Decay time in position LONG.
PercShortTm:
Decay time in position SHORT.