KEYBOARDPARTNER Hammond XB2, User Manual, Page: 15 / 24

XB2 Kit 15
Audio Setup
Master Volume: Sets the volume for all outputs. Higher values result in a better signal to noise
ratio.
TubeAmp Gain: Sets the level of the simulated tube amplifier. The amplifier enters saturation and
distorts at high values and higher swell pedal values. So the distortion level is controlled with the
swell pedal as well. If
Gain Vol Compensation is set in parameter 1501 of the editor, Gain works
almost volume-neutral.
TubeAmpBypass: When ON, the rotary tube amplifier is bypassed.
The Audio Setup menu items have a common submenu:

Bass Equal: Bass level adjustment

Bass Equ Frq : Bass filter frequency, invalid if Parameter B/T is set to OFF.

Bass Equ Q: Bass filter Q (bandwidth), invalid if Parameter B/T is set to OFF

Mid Equal: Mids level adjustment

Mid Equ Frq: Mids filter frequency

Mid Equ Q: Mids filter Q (bandwidth)

Treble Equal: Treble level adjustment

Treb Equ Frq : Treble filter frequency, invalid if Parameter B/T is set to OFF.

Treb Equ Q: Treble filter Q (bandwidth), invalid if Parameter B/T is set to OFF.

Parametr B/T: Parametric equalizer also for bass/treble. If Parameter B/T is set to OFF, the
equalizers for bass and treble act as shelving filters.

Upper Lvl Adj: Allows separate upper manual default level setting.

Lower Lvl Adj: Allows separate lower manual default level setting.

Pedal Lvl Adj: Allows separate pedal default level setting.

Perc Lvl Adj: Allows percussion level setting.

PedalRotBypas: Routes the pedal signal to bypass the CaM Rotor, optionally only to the
separate pedal output, if No Pedal on Main is set in parameter 1501 of the editor.

AO28 Tone Pot: Tone potentiometer setting on preamp.

AO28 Gain Cap: Overall gain of AO28 preamp.

AO28 MinSwell: Minimum volume of swell pedal in heel position.

AO28 Tube Age: Age of the preamp tubes. The higher the value, the older, and the more
noticeable the triode distortion becomes.