MY20K03-2_1.0_18.07.2019
69
Operation
6.13.6.11 Changing the font colour
The
settings menu
is open.
Press the
button (display)
briefly repeatedly
until FONT COLOR is displayed.
Press the
button (display)
.
You will see two selection options:
Push the
long assistance lever
or the
short
assistance lever
briefly until the required
function is highlighted.
Press the
button (display)
.
The font colour has been changed.
The display screen switches back to the start
screen.
6.13.6.12 Setting the gear shift
6.13.6.13 Rear derailleur reset
The rear derailleur protection function will trigger
to protect the system if the pedelec is exposed to
a severe impact – due to a fall, for example. The
connection between the motor and the link is
interrupted instantly, rendering the rear derailleur
inoperable.
If you open RD PROTECTION RESET, the
connection between the motor and link is re-
established and the rear derailleur function reset.
The
settings menu
is open.
Press the
button (display)
repeatedly until
RD PROTECTION RESET is displayed.
Press the
button (display)
.
You will see two selection options:
Push the
long assistance lever
or the
short
assistance lever
briefly until the required
function is highlighted.
Press the
button (display)
.
The display screen switches back to the start
screen.
Turn the crank.
The connection between the motor and the link
is restored.
Screen display
Function
WHITE
Black letters on a white background
BLACK
White letters on a black background
Table 42: Font colour change options
You can only configure the gear shift if you are
using an electronic gear shift.
The gear shift is adjusted in the
settings menu
with
the menu item ADJUST. Special knowledge and
tools are required for setting the gear shift. These
settings must only be made by a specialist dealer.
Screen display
Function
OK
Rear derailleur reset is
in progress
CANCEL
Returns to the menu list display screen
Table 43: Rear derailleur reset change options
