Kettler Quadriga, Translation Of The Original Operating Instructions

Page: 119 / 124

877-00136_1.0_17.09.2018
120
Appendix
10.3 Table of figures
Figure 1: Type plate, example, 17
Figure 2: Bicycle viewed from the right, 2° E Beltdrive used as
example,
24
Figure 3: Detailed view of bicycle from rider position, example, 25
Figure 4: Components of the wheel – example showing front
wheel,
27
Figure 5: Rim brake components with details – example: Magura
HS22,
29
Figure 6: Rim brake locking lever, closed (1) and open (2), 30
Figure 7: Diagram of drive system, 31
Figure 8: Diagram of electric drive system, 32
Figure 9: Integrated battery details, 34
Figure 10: Operating element overview, 35
Figure 11: Fastening the transport securing device, 41
Figure 12: Horizontal saddle tilt, 52
Figure 13: Optimal saddle height, 53
Figure 14: Seat post quick release (3) with clamping lever (5) and
setting bolt (4) in the open position (1) and in the direction
of the closed position (2), 53
Figure 15: Detailed view of the seat post – examples of the minimum
insertion depth marking,
54
Figure 16: The seat post activation lever can be mounted either on
the left (1) or the right (2) side of the handlebars,
55
Figure 17: Knee cap perpendicular line, 56
Figure 18: Open (2) and closed (1) clamping lever on the stem –
example: by.schulz speed lifter,
58
Figure 19: Pulling locking lever upwards – example: by.schulz speed
lifter,
59
Figure 20: Using the twist knob (1) to adjust the pressure point, 61
Figure 21: Brake lever grip distance, 62
Figure 22: Using the setting screw (2) to adjust the distance from the
brake lever to the handlebar grip (1), 62
Figure 23: Down shifter (1) and up shifter (2) on the left (I) and
right (II) shift, 78
Figure 24: Front (2) and rear (1) brake lever – example: Shimano
brake,
83
Figure 25: Checking the chain and belt tension, 97
Figure 26: Wheel quick release, version I, with clamping lever (2),
fork (1) and setting nut (3),
102