MY20K10 - 12_1.0_11.01.2021
72
Operation
The push assist system helps move the
S pedelec. The speed is a maximum of 6 km/h in
this case.
The level of assistance <OFF> must not be
selected.
The tractive power of the push assist and its
speed can be influenced by the selection of gear.
We recommend using first gear for cycling uphill
to protect the drive.
Figure 79: Push assist button position on the operating
element
1
Press the
push assist button
briefly.
The push assist is activated.
2
Press and hold the
plus button
within three
seconds.
Push assist is activated.
3
Release the
plus button
on the operating
element to switch off push assist. The push
assist system switches off automatically as
soon as the S pedelec wheels are blocked or
the speed exceeds 6 km/h.
6.13.8 Selecting the level of assistance
The operating element is used to set how strongly
the electric drive assists the driver when
pedalling. You can change the level of assistance
at any time, even when you are cycling.
Figure 80: Position of plus and minus buttons
Press the
plus button
on the operating
element to increase the level of assistance.
Press the
minus button
on the operating
element to reduce the level of assistance.
The motor power used appears on the screen.
The maximum motor power depends on the
selected level for assistance. If the on-board
computer is removed from its mount (5), the
last displayed level of assistance is saved.
1
1
2
