MY20K10 - 12_1.0_11.01.2021
39
Assembly
4
Pull out the PowerTube adapter.
Figure 26: Pulling out the PowerTube adapter
5
Use adapter plates to adjust the distance if
necessary.
Figure 27: Fitted adapter plates
6
Use a TORX® T25 wrench to fasten the screws
into the battery mount.
Figure 28: Fastening the battery mount
5.4.3
Fit battery cover onto Bosch
PowerTube 625 battery (horizontal)
1
Detach the upper interface (lock side) from the
Bosch PowerTube 625 battery with a TORX®
T20 wrench.
Figure 29: Detaching the upper interface
2
Screw the battery mounting plate onto the
PowerTube 625 battery with original Bosch
screws (M4 × 8 T20). In doing so, ensure that
the removal tab faces the front of the battery.
Figure 30: Fitting the mounting plate
