Kettler KB142-ZXRW, Translation Of The Original Operating Instructions

Page: 78 / 154

MY21K01 - 32_1.0_24.09.2020
78
Operation
6.11.3 Integrated battery
Only applies to pedelecs with this equipment
6.11.3.1 Removing the integrated battery
Figure 99: Removing the integrated battery
1 Open battery lock with battery key (see [1]).
 The battery is released and falls into the
retainer guard (see [2]).
2 Hold the battery in your hand from below. Use
the other hand to push on the retainer guard
from above (see [3]).
 The battery is released and falls into the hand
(see [4]).
3 Remove the battery from the frame.
4 Remove the battery key from the battery lock.
6.11.3.2 Inserting the integrated battery
Figure 100: Inserting the integrated battery
1 Place the battery into the lower mount with the
contacts facing the front (see [1]).
2 Flip the battery up so that the battery is held by
the retainer guard (see [2]).
3 Push the battery upwards (see [3]).

There is an audible clicking noise.
4 Check battery to ensure it is firmly in place.
5 Lock the battery with the battery key;
otherwise, the battery may fall out of the mount
when you open the lock (see [4]).
6 Remove the battery key from the battery lock.
7 Check the battery to ensure it is firmly in place.
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)