Kettler KB142-ZXRW, Translation Of The Original Operating Instructions

Page: 45 / 154

MY21K01 - 32_1.0_23.09.2020
45
Assembly
5.4.1 Installing the wheel in the Suntour
fork
5.4.1.1 Screw-on axle (15 mm)
Only applies to Suntour forks with 15 mm screw-on axle
1 Insert the axle completely on the drive side.
Figure 45: Fully inserting the axle
2 Tighten the axle to 8–10 Nm with a 5 mm
hexagon socket spanner.
Figure 46: Tightening the axle
3 Insert the securing screw on the non-drive
side.
Figure 47: Pushing the quick release lever into the axle
4 Tighten the securing screw with a 5 mm
hexagon socket spanner to 5–6 Nm.
 The lever is mounted.
Figure 48: Tightening the securing screw
5.4.1.2 Screw-on axle (20 mm)
Only applies to Suntour forks with 20 mm screw-on axle
1 Insert the axle completely on the drive side.
Figure 49: Tightening the inserted axle
2 Tighten the securing clip with a 4 mm hexagon
socket spanner to 7 Nm.
Figure 50: Tightening the securing clip