Instruction manual KettenMax Classic
1. Preparation
Jack up the motorcycle. You must be able to rotate the rear wheel by hand.
2. Cut lateral cleaning brushes to width of the chain rollers
Mark the brushes at the width of the rollers.
Page 1: ...nual KettenMax Classic 1 Preparation Jack up the motorcycle You must be able to rotate the rear wheel by hand 2 Cut lateral cleaning brushes to width of the chain rollers Mark the brushes at the width of the rollers ...
Page 2: ...2b Adjusting Cut brushes to desired size by with scissors and install into lower tank At an easily accessible point connect upper and lower tank over the chain and secure with O ring clip ...
Page 3: ... side hook small in the hanging perforation on the KettenMax aligning it with the chain Connect both hooks with the cord 5 Cleaning the chain Connect the bottle to the KettenMax unit and squeeze the bottle to apply a controlled dose of cleaning agent At the same time slowly turn the rear wheel the chain will be drawn through the KettenMax to ensure gentle overall cleaning ...
Page 4: ...t in steps Rotate the rear wheel slowly 2 x chain runs per minute The lubricant accurately coats the important inner side of the chain and is evenly distributed by brushes Contaminated cleaning solution and any excess lubricant must be drained into a container and appropriately disposed of in an environmentally friendly manner IMPORTANT Never rotate the rear wheel when the motor is running and a g...
