17
6-7.Spare needle, Conductive rubber Replacement
To replace needles in the needle probe or to install a conductive
rubber piece, use the included wrench, and replace them by
loosening the mounting screw. When installing a sensor needle,
orient the concave part of the needle so that it comes in contact
with the head of the screw as shown in the diagram.
• For thin sheets such as veneer, laminate, etc., or for cases such as
product inspections in which you do not want to scratch the surface,
use a “conductive rubber” to make measurements.
Sensor needle
(spare needle)
Conductive rubber
Mounting screw
Wrench
Sensor needle
Mounting screw
Concave part
