Person
Approved activities on KESSEL systems
Technical expert, (familiar with,
understands operating instructions)
Emptying, cleaning
(inside), functional check
Technical specialist, (technical worker,
in accordance with installation instruc-
tions and execution standards)
Installation, replacement, mainte-
nance of components, connection
to power supply, commissioning
3
Introduction
3.1
Intended use
The backwater pumping station serves as a draining system for wastewater without sewage, domestic or industrial waste-
water.
The system is resistant to the usual domestic acids and alkalis. Condensate from condensing boilers must be neutralised or
diluted. Alternatively, a chemical-resistant customised solution can be purchased ([email protected]). The system must
be installed in a building to guarantee frost protection.
Note on warranty
Only KESSEL accessories designed for the product may be used. If any modifications are made to the product or non-
original accessories are used, the warranty becomes null and void.
3.2
Scope of delivery
Pumpfix F version for installation in the floor slab
(1)
Extension section (optional, max. 2)
(2)
Pump
(3)
Seal
(4)
Drain body
(5)
Inlet side connections
(6)
Upper section, with inflow cover
(7)
Power pack (E-pack)
(8)
Motor-driven flap unit
(9)
Outlet side connections
EN
010-843
Installation and operating instructions
19 / 96
