Kessel 28760, Manual

Page: 21 / 76

4 Installation
Do not pull or carry the device by the cable!
Hold and carry the pump by the carrying handle.
Connecting the pressure pipe (A - use as system pump/
replacement pump)
Position the pump.
Lock the one-handed closure.
Fitting the hose connection (B - mobile use)
Remove the connecting socket (two screws).
Fit the hose connection adapter.
Place the pump stable in a stable position on a level sur-
face.
Heed the switch-on level of the pump,
see "Technical
data", page 19
.
Connecting the pressure pipe (C/D - use as system
pump)
Remove the connecting socket (two screws).
Fit the one-handed closure/riser adapter.
Position the pump.
If necessary, grease the seal at the pressure pipe con-
nection
Lock the one-handed closure (or the top hose clamp).
Connecting the mains connection/commissioning
EN
016-212_01 21 / 76