TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
59
12.1 Counting the number of pieces
The
<Piece counting>
application enables to count many pieces placed on the scale
plate.
Before it is possible to count pieces using the scale, you should determine the
average weight of an individual part (unit weight), the so-called reference value. For
that purpose, place a specific number of counted parts on it. The scale will determine
the total weight which will be divided by the number of pieces, the so-called reference
piece number. Next, based on the calculated mean weight of an individual part, the
number of pieces will be counted.
The following rule applies:
The higher number of the reference pieces, the higher the accuracy of counting.
12.1.1 Determining the reference value by weighing
Using the navigation buttons
, select the
<Piece counting>
application and
confirm by pressing the
button, the current setting of reference pieces will
be displayed.
Using the navigation buttons
, select the required setting.
Symbol
Description
10 pieces
Number of reference items 10
25 pieces
Number of reference items 25
50 pieces
Number of reference items 50
100 pieces
Number of reference items 100
Manual
Entering the reference weight value in the numerical
form, see chapter
Whenever required, place the scale container, confirm the preset number of
reference items by pressing the
button.
Place the number of the counted parts corresponding to the preset number of
reference items.
