KERN PLJ Operating Manual Download Page 53

Page: 53 / 101

TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011

11.5 Filter

This menu item enables to adapt the scale to the specific environment conditions and
measurement objectives.



Using the navigation buttons



, select the menu item <

Filter



Confirm by pressing the

PRINT

button, the current setting will be displayed.



Using the navigation buttons



, select the required setting.

Symbol

Description

Filter 1

Dosing setting

Filter 2

The scale response is sensitive and fast — very calm
setting item

Filter 3

The scale response is not sensitive but slow — not
calm setting item



Confirm the selection, pressing the

PRINT

button. The scale will be switched to

the menu again.



Return to the weighing mode, pressing the

ON/OFF

button.

11.6 Stability



Using the navigation buttons



, select the menu item <

Stability



Confirm by pressing the

PRINT

button, the current setting will be displayed.

Summary of Contents for PLJ






































































































Search results

Summary of Contents for PLJ

Reviews:

Related manuals for PLJ

Brands by name

Popular brands

KERN PLJ, Operating Manual

Search results

Summary of Contents for PLJ

Reviews:

Related manuals for PLJ

Brands by name

Popular brands