KERN PLJ Operating Manual Download Page 35

Page: 35 / 101

TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011

8.1 Adjustment mode selection



In the weighing mode press and hold the

MENU

button until the

sound signal stops. The configuration menu is displayed.



Using the navigation buttons



, select the menu item

<Calibration

mode>



Confirm by pressing the

PRINT

button, the current setting will be

displayed.



Using the navigation buttons



, select the required setting.

Auto. calibration

Automatic adjustment using the internal weight.
Factory setting in the models in the verifiable setting.

Internal calib.

Adjustment using the internal weight after the

CAL

button

is pressed.
Not available in the models in the verifiable setting.

External calib.

Adjustment using the external weight, not available in the
models in the verifiable setting.
In models with the internal adjustment weight we do not
recommend adjustment using the external weight.

Technical calib.

Changing the weight of the internal calibration weight.
Not available in the models in the verifiable setting.



After the “Internal, external or automatic adjustment” option is

selected confirm by pressing the

PRINT

button.

After the “Technical adjustment” option is selected, to confirm press
and hold the

PRINT

button until the sound signal stops.

The scale will be switched to the menu again.



To leave the menu/return to the weighing mode, press and hold the

MENU

button until the sound signal stops.

Summary of Contents for PLJ






































































































Search results

Summary of Contents for PLJ

Reviews:

Related manuals for PLJ

Brands by name

Popular brands

KERN PLJ, Operating Manual

Search results

Summary of Contents for PLJ

Reviews:

Related manuals for PLJ

Brands by name

Popular brands