Weighing units
switch-over
Ö
Press the UNIT key in the weighing mode to switch-over
between the available weighing units
Plus/minus
weighings
For example unit weight control, fabrication control etc.
Ö
Put the nominal weight on the weighing plate and tare using
the
TARE
button.
Ö
Remove the nominal weight
Ö
Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+“ and „-“.
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
Ö
Back to weighing mode by pressing the
TARE
button.
15
EMS-BA-e-1112
