background image

EC-BA-defs-0113 

23

 

Characters 

 

g, kg, lb 

: Weight unit in weighing. 

: Indication of pieces in counting mode. 

 

 

: Total sample weight on the pan is too light to process an 
  accurate unit weight. 

 

: Indicates battery has run out (option). 

: Indicates the balance is under setting operation, or sampling. 

 

Upper   

: Appears when other weight unit than "g" or "lb" is selected. 
  It is recommended to stick a seal of the weight unit at the mark. 

Lower   

: Indicates the balance mode is in Unit Weight Display Mode. 

 
 
 

9 Installation 

 

Location 

 
KERN EC balances are very robust, still it is an "precision weighing instrument" 
which requires gentle operation and handling with care. Install the unit in good 
conditions for optimum results. Locations as follows may cause erroneous results. 
 
1. Areas having a soft floor to make the balance 

not level. 

2. Areas where temperature changes abruptly. 
3. Areas in high humidity or dusts. 
4. On an unstable base or near to a source of 

vibration. 

5. Areas exposed to a wind from a fan or a 

cooler. 

6. Areas exposed to direct sunlight. 
 

 

Summary of Contents for EC 12K 1















Reviews: